{"id":805,"date":"2023-07-18T06:48:55","date_gmt":"2023-07-18T06:48:55","guid":{"rendered":"https:\/\/rcdedication.com\/?p=805"},"modified":"2023-07-18T06:52:21","modified_gmt":"2023-07-18T06:52:21","slug":"why-wont-my-traxxas-slash-steer","status":"publish","type":"post","link":"https:\/\/rcdedication.com\/why-wont-my-traxxas-slash-steer\/","title":{"rendered":"Why Won’t My Traxxas Slash Steer?"},"content":{"rendered":"

If you are having problems steering your Traxxas Slash keep reading. Also, learn if driving your car in the snow is an option. And if washing your car is a good idea.<\/p>\n

Why Won’t My Traxxas Slash Steer?<\/h2>\n

Here are the common reasons for this:<\/p>\n

1. Servo Failure<\/h3>\n

The servo motor is a crucial component in the steering mechanism of the Traxxas Slash. It converts electrical energy into mechanical energy used to move the steering linkages. If your car isn’t steering, a broken or failing servo could be the culprit.<\/p>\n

To check if the servo is the problem, first, turn on your car and controller and try to steer. If you hear a buzzing or see the servo trying to move, it could indicate a mechanical issue with the servo.<\/p>\n

Alternatively, a lack of response could indicate an electrical issue. In either case, the servo might need to be replaced.<\/p>\n

2. Faulty Receiver or Transmitter<\/h3>\n

\"DUMBORC<\/a><\/p>\n

Click here for the price, on Amazon #Ad<\/a><\/p>\n

Your RC car’s steering is controlled wirelessly via a receiver in the car and a transmitter in your remote control. If either of these devices is damaged or malfunctioning, it may result in your Traxxas Slash refusing to steer.<\/p>\n

A simple way to test if your receiver or transmitter is the issue is to swap them out with ones from a working RC car, if available. If your car steers with the replacement parts, it’s a clear indication of a receiver or transmitter issue.<\/p>\n

3. Steering Setup<\/h3>\n

If the servo, receiver, and transmitter all seem to be in order, the issue could be a mechanical one with the steering setup. The linkages that connect the servo to the wheels may be damaged or disconnected.<\/p>\n

Visually inspect the steering setup of your Traxxas Slash for any obvious issues such as missing or damaged parts. Check the manual to ensure all parts are correctly installed and aligned. A poorly aligned setup can drastically affect the steering performance.<\/p>\n

4. Power Issues<\/h3>\n

Steering requires a good amount of power, especially when the car is stationary. If your car’s battery is drained or dying, there may not be enough power for the servo to operate effectively.<\/p>\n

Try charging your battery fully and see if that resolves the steering issue. If it does not, you might want to check the power connection between the battery and the servo.<\/p>\n

5. Software Issues<\/h3>\n

The final potential problem could be a software issue. If your transmitter has been accidentally reprogrammed or the firmware has become corrupted, it could lead to steering issues. Refer to your transmitter’s manual for instructions on how to reset or reprogram it to the default settings.<\/p>\n\n

Can You Drive a Traxxas Slash in the Snow?<\/h2>\n

Yes. But, it’s not a good idea. Snow presents unique challenges for RC vehicles. It is both a different terrain and a different climate condition, which can affect the operation of the vehicle.<\/p>\n

The main issues arise from the moisture of snow, the cold temperatures, and the varying density and depth of the snow, which can impact traction and the power system.<\/p>\n

Waterproofing<\/h3>\n

Most Traxxas Slash models are already waterproof, allowing them to operate in wet environments without immediate damage.<\/p>\n

The Traxxas Slash uses waterproof electronics including the receiver box, servo, and electronic speed control. This waterproof feature makes it possible to drive a Traxxas Slash in snow without worrying about short circuits.<\/p>\n

However, just because an RC car is waterproof does not mean it’s invincible. Continuous exposure to water (and by extension, snow) can lead to rust and corrosion over time. Therefore, it’s crucial to clean and dry your vehicle after every snow ride.<\/p>\n

Maintaining Battery Performance<\/h3>\n

Cold temperatures can also impact the performance of your RC vehicle’s battery<\/a>. The Traxxas Slash typically uses a Lithium Polymer (LiPo) battery, which can have decreased output in cold weather, leading to reduced run times.<\/p>\n

It is advised to keep your batteries warm before use and consider shorter run times in cold weather.<\/p>\n

Navigating Through Snow<\/h3>\n

Snow varies in density and depth, which can affect how your Traxxas Slash moves. Loose, fluffy snow can bog down your car, while compacted snow might provide a smoother ride.<\/p>\n

In deeper snow, a 4×4 model would perform better due to increased traction. Paddle tires can also be an excellent modification to improve traction in the snow.<\/p>\n

Protection Against Cold Weather<\/h3>\n

Cold weather might make plastic parts more brittle, making them susceptible to damage from impact. To mitigate this, try to limit high-impact driving in colder weather. Some hobbyists also suggest warming up the vehicle (especially plastic parts) indoors before taking it out in the cold.<\/p>\n

Can I Wash My Traxxas Slash?<\/h2>\n

Yes. But, you have to be careful or face damaging the vehicle. The Traxxas Slash is equipped with waterproof electronics, meaning it can withstand light water exposure. However, this doesn’t mean you can submerge it in water or subject it to high-pressure water jets, as this could lead to serious damage.<\/p>\n

Remember, waterproof does not mean water-immune.<\/p>\n

Basic Cleaning Tips<\/h3>\n

Use Compressed Air: One of the simplest ways to clean your Traxxas Slash is by using compressed air. This is a particularly effective method for removing loose dirt and dust without exposing your RC vehicle to water.<\/p>\n

Aim the air at the dirtiest parts of the car, taking care not to damage the vehicle’s smaller components.<\/p>\n

Brushing:<\/h4>\n

Use a soft-bristle brush or old toothbrush to remove stubborn dirt or mud. This is a great method for cleaning the undercarriage, tires, and body shell of your Traxxas Slash. Ensure to do this gently to avoid causing scratches or damage to your RC car.<\/p>\n

Using Water:<\/h4>\n

If your Traxxas Slash is particularly dirty, you may need to resort to using water for a more thorough clean. Here’s a step-by-step guide on how to do it correctly:<\/p>\n